MTX-Router-Titan – AT Command

In this section it is possible to send an AT command directly to the router’s internal modem. For example, it could be interesting to check the network coverage, identify the telephone cells in the area, etc.

It is also possible to configure up to five special AT commands which can be used to configure the router upon startup.

• AT Command: AT command for real time execution (for example AT+CSQ). Once “SEND AT COMMAND” is clicked, the command will be executed
• AT1… AT5: start up AT commands

ADDITIONAL NOTES

• Once the configuration is finished, click “SAVE CONFIG” to save the changes. Remember that the router should be restarted for the changes to take effect.