MTX-GATEWAY Wiki
MTX-GATEWAY
1. Introduction
The MTX-GTW terminal is a Linux-embedded device designed for industrial use thanks to its IP65 casing. The wide variety of supported interfaces includes:
- CAN
- Ethernet
- WiFi
- USB OTG
- miniPCIe Card
- 1-Wire
- RS232, RS485
- VGA
These make it the ideal choice for the majority of applications. By following the link, you will find the product’s Datasheet. 
2. Latest Updates
- [Nov. 2013] First MTX-GATEWAY prototypes undergoing testing.
- [Abril 2014] MTX-GATEWAY in production.
3. Current Status
Version MTX-GATEWAY V1.02
| Interface | Status | Details |
| Power Supply | OK | Tested AC:100~220V and DC:7~50V |
| Ethernet | OK | |
| RS232 (UART1) | OK | |
| RS232 (UART3) | OK | |
| RS232/RS485 (UART0) | OK | Tested Half & Full Duplex |
| CAN | OK | |
| RTC (DS1339U) | OK | |
| USB OTG | OK | |
| MiniPCIe Card | OK | Tested both USB and SIM interfaces |
| VGA | OK | |
| 1-Wire | OK | |
| WiFi | OK | |
| GPIOS | OK | GPIO0_7 and GPIO0_16 -> Relays |
| RF expansion port | OK | Tested UART, GPIOs and Power Supply |
4. Hardware Manual
The following link contains a link to the latest version of the Hardware Manual of the MTX-GATEWAY device. MTX-GATEWAY HW Manual
5. Software Manual
The BSP available for the MTX-GTW device is based on ptxdist. The following link contains a detailed description of how to use it. Software Guide
6. Application Notes
Leave a Reply
Want to join the discussion?Feel free to contribute!