EOS – Configuration for Connection

/in /by
¿Buscas alguna otra cosa?
< Back to Knowledge Base

Configuration for Connection

Before configuration, you should connect the router and your PC with the supplied network cable. Plug the cable’s one end into the Local Network port of the router, and another end into your PC’s Ethernet port.

The connection diagram is as following:

Please modify the IP address of PC the same as network segment address of the router, for instance, 192.168.1.9. Modify the mask code of PC as 255.255.255.0 and set the default gateway of PC as the router’s IP address (192.168.1.1).