Titan – Example Scenario 2.1: Provide Internet access to a device with an Ethernet port we want to access remotely with a SIM card and a dynamic IP address along with the DynDNS or No-IP service

/in /by
¿Buscas alguna otra cosa?
< Back to Knowledge Base

Details of the example scenario:

  • We have a device with an ETH port which we want to access remotely via Internet along the TCP port 502. The Ethernet device has a local IP address of 192.168.1.70
  • We have to be able to access the router’s configuration remotely in the standard TCP port 80
  • We want to be able to remotely access the device. SIM cards with a dynamic IP address will be used, therefore we will use the DynDNS or No-IP services

Solution: MTX-Router-Titan mini

Configuration example ready for use:

We can easily load the example from the router’s web configuration environment from the menu “Other>Backup/Examples”

Details:

  • After the configuration is loaded in our router, we can access the router’s configuration with the default username and password: “admin” and “admin”, and the IP address“192.168.1.2”
  • Check the configuration in the menus “Wan>Basic Settings”,”Firewall>Nat”, “Other>DynDNS”
  • Remember that in order to work, the Gateway IP address of the Ethernet device should be specified along with the router’s LAN IP address. In this example, it would be 192.168.1.2