Tunnel – Double 4G-RS232 tunnel. Two RS232 devices controlled by a single modem and a single SIM card. Client socket connection type
¿Buscas alguna otra cosa?
Scenario details:
- We want to control 2 serial RS232 devices that are near to each other. Therefore, as the modem MTX-4G-Java-IOT has 2 serial ports, each serial port will be connected to one of two control devices which will save the system by using a single modem and a single SIM card
- The modem is required to simultaneously create two 4G-RS232 gateways in client mode. The PC server’s 20010 TCP port will connect to the gateway that has access to the modem’s COM1 serial device and the 20011 TCP port will connect to the gateway that has access to the modem’s COM2 serial device
- The 2 tunnels must be permanently connected
Solution: MTX-Tunnel firmware + MTX-Java-IoT/MTX-Java-T/MTX-Java-T2
Config.txt configuration file:
| Configuration | Observations |
| COMM_baudrate: 9600 COMM_bitsperchar: 8 COMM_autocts: on COMM_autorts: on COMM_stopbits: 1 COMM_parity: none COMM2_baudrate: 19200 COMM2_bitsperchar: 8 COMM2_stopbits: 1 COMM2_parity: none GPRS_apn: movistar.es GPRS_login: MOVISTAR GPRS_password: MOVISTAR GPRS_timeout: 0 MTX_model: MTX-4G-JAVA-T2 MTX_mode: client MTX_urc: off MTX_IDClient: ID1234ABCD MTX_rssiLevel: 10 TCP_IP: 176.10.12.14 TCP_port: 20010 TCP_IP2: 176.10.12.14 TCP_port2: 20011 |
Serial port baud rate 8 bit data CTS hardware control enabled RTS hardware control enabled 1 stop bit No parity Serial port baud rate 2 8 bit data 1 stop bit No parity GPRS APN from your network operator GPRS Login GPRS Password Modem is connected to GPRS permanently MTXTerminal modem model used TCP client mode URC messages will not be sent MTX identifier Activation of signal level LED The gateway associated with COM1 will connect to this IP Gateway associated with COM1 will connect to this TCP The gateway associated with COM2 will connect to this IP Gateway associated with COM2 will connect to this TCP |