Tunnel – IEC870-5-102 configuration parameter: “IEC102_”

The parameters with an IEC102_ prefix are those related to the MTX-Tunnel configurations in meter telemetry scenarios that use the IEC870-5-102 protocol.

The MTX-Tunnel has part of the IEC870-5-102 protocol implemented inside it, which allows it to read certain parameters such as the ABSOLUTE_ACTIVE ENERGY (VabA), the ABSOLUTE_REACTIVE_INDUCTIVE_ENERGY (VabRi), the ABSOLUTE_ENERGY_REACTIVE_ENERGY (oneb_REACTIVE_ENERGY) with IEC870-5-102 protocol… in real time, to be sent to an HTTP / MQTT platform and to be used by energy efficiency companies.

The IEC102_ configuration parameters are only available in the “MTX-Tunnel IEC870”, it is a product that is supplied separately.

IEC102_meter1,  IEC102_meter2, …  IEC102_meter16

Description: This parameter allows to specify the basic configuration of each IEC870-5-102 meter to be read, specifying an identifier, the relay address, the measurement point address and the access password.

This parameter must be specified by separating the parameters by; (semicolon).

Possible values:

• <ID>;<link address>;<measured point direction>;<password>
  <ID>:  User counter identifier. Sring. Maximum 16 characters
  <Link address>: 1 … 65535
  <Measured point direction>: 0 … 65535
  <Password>: 0 … 4294967295
• Default value: none

Additional notes:

• Check with iotsupport@mtxm2m.com if you need additional help.

IEC102_period

Description: This parameter allows you to specify the reading period of the counters. It is expressed in minutes. The specified number must be a divisor of 1440 (1440 minutes are the minutes of 1 day). For example, if you specify 15, the reading process will start at XX: 00, XX: 15; XX: 30, XX: 45.

Possible values:

• 1, 2, 3, 4, 5, 6, 8, 9, 10, 12, 15, 16, 18, 20, 24, 30, 32, 36, 40, 45, 48, 60, 72, 80, 90, 96, 120, 144, 160, 180, 240, 288, 360, 480, 720, 1440
• Default value: 15

Additional notes:

• Check with iotsupport@mtxm2m.com if you need additional help.