Tunnel – TACACS+ related configuration parameters: “TACACS_”

/in /by
¿Buscas alguna otra cosa?
< Back to Knowledge Base

The MTX-Tunnel firmware has TACACS + authentication support as of version 9.26. That is, it is possible to use a Tacacs + server to authenticate a user who wants to use the Telnet or SNMP service.

It will be necessary to configure the TELNET_auth or SNMP-auth parameter with the “tacacs +” option in order to use this functionality.

TACACS_server

Description: It will be the tacacs server + to use in case the Telnet or SNMP service authentication mode, is this method.

Possible values:

  • IP or DNS
  • Default value: none

TACACS_port

Description: Specifies the TCP port that the MTX-Tunnel will use for the Tacacs + authentication service.

Possible values:

  • 1… 65535
  • Default value: 49

Additional notes:

  • The same TCP port used in the TCP_port and / or WEBSERVER_port and / or TELNET_port parameters should not be used

TACACS_key

Description: KEY used for the Tacacs + authentication service. This KEY is shared by the Tacacs +.

Possible values:

  • A maximum string of 32 characters
  • Default value: none